成人快手

Plugs

The inside of a plug showing the positioning of the earth, neutral and live wires, as well as the fuse and cable grip.

The electricity coming into your home is called mains electricity.

Mains voltage in Northern Ireland is 230 V.

A plug connects a device to the mains electricity supply.

The cable between the device and the three-pin plug contains three copper wires that are coated with plastic.

  • copper wires are good ;
  • plastic is a good .

Each part of the plug has a function.

Features of a plugFunction
Outer insulationAll three wires in the cable are bundled together and there is extra plastic insulation wrapped round them all for safety.
Cable gripThis holds the cable tightly in place so that wires do not become loose.
Live wireCopper wire coated with brown plastic along which the current enters the device.
Fuse A glass or ceramic canister containing a thin wire that melts if the current gets too high.
Neutral wireCopper wire coated with blue plastic that also connects to the cable in the wall and completes the circuit.
Earth wireCopper wire coated in striped yellow and green plastic that provides a path for current to flow from the case of the device to the ground if there is a fault.
Features of a plugOuter insulation
FunctionAll three wires in the cable are bundled together and there is extra plastic insulation wrapped round them all for safety.
Features of a plugCable grip
FunctionThis holds the cable tightly in place so that wires do not become loose.
Features of a plugLive wire
FunctionCopper wire coated with brown plastic along which the current enters the device.
Features of a plugFuse
FunctionA glass or ceramic canister containing a thin wire that melts if the current gets too high.
Features of a plugNeutral wire
FunctionCopper wire coated with blue plastic that also connects to the cable in the wall and completes the circuit.
Features of a plugEarth wire
FunctionCopper wire coated in striped yellow and green plastic that provides a path for current to flow from the case of the device to the ground if there is a fault.

One way of remembering the position of the wires is:

ColourPosition
BLue Bottom Left
BRown Bottom Right
ColourBLue
PositionBottom Left
ColourBRown
PositionBottom Right