成人快手

Key facts

Hydroelectric power (HEP) is the second biggest energy generator in Scotland behind onshore wind farms.

HEP relies on the flow of water due to gravity to generate electricity.

Larger HEP schemes involve building a dam across a river valley. This means water can be stored in a reservoir and released when electricity is needed. As the water is stored and its flow can be controlled, HEP is more reliable than renewable energy sources that depend directly on the weather.

A dam holds back huge volumes of water
Image caption,
A dam holds back huge volumes of water

Hydroelectric power and its impact

Find out how water can be used to generate electricity.

How hydroelectricity is generated

Large scale hydroelectric schemes work by storing water behind a dam and releasing a controlled amount of water to generate electricity.

Diagram showing the workings of a hydroelectric power plant
Figure caption,
How a hydroelectric (HEP) power plant works
  1. All that lovely Scottish water is stored high up in valleys behind a dam. At this point, the energy stored there is called potential energy.
  2. When the water is released, makes it fall down through pipes in the dam. All that potential energy changes to a huge amount of kinetic energy.
  3. Down at the bottom are enormous . The kinetic energy of the falling water turns the blades of the turbines. This turns electromagnets in a generator, which changes kinetic energy into electrical energy.
  4. Once it鈥檚 done its job of turning the turbines and generating electricity, the water flows out of the power station and downstream.
  5. In pumped storage power stations, the water is stored in a lower reservoir and can be pumped back up hill to the dam so it can be used again and again. The water is pumped back up at night when there is excess electricity in the National Grid.

Run of river hydroelectricity

An intake weir diverts water from a stream through pipes to a powerhouse. In the powerhouse it turns a turbine which spins a generator that generates electricity. The water returns to the stream  through an outlet pipe.
Figure caption,
How a run of river hydro scheme works

Run of river hydroelectric systems are smaller projects that work without a dam. This means they cause less disruption to the flow of a river and the local environment.

  1. Some water from a river or stream is diverted through an intake weir.
  2. Gravity causes the water to run downhill through underground pipes.
  3. The water is piped through a turbine in a powerhouse.
  4. The spinning turbine turns a generator that generates electricity.
  5. The water flows from the turbine and through an outlet back into the river.

Location factors

As you鈥檇 expect, HEP requires an abundance of precipitation (rain, hail, sleet and snow). It works best in wetter areas of the world, such as the north west U.S.A.

Steeper land is an ideal location for the power station as higher land receives more precipitation. For example, the Highlands of Scotland.

V-shaped valleys or U-shaped valleys can both be used as locations for Hydro Electric Power stations. U-shaped valleys provide a flat base for reservoirs, which means they can be store large volumes of water.

Higher, steeper valleys can generate more electricity because of greater .

The siting of an HEP scheme needs to take into consideration the effect on local populations and wildlife, so that large numbers of people do not need to be relocated, and sensitive habitats and species are not damaged or destroyed.

Glen Doll, Cairngorms
Image caption,
Glen Doll, Cairngorms, Scotland.

Sustainability of hydroelectric power

Cruachan Hydroelectric Power Plant, Argyll and ButeImage source, ALAMY: G3 KRG2
Image caption,
Cruachan Hydroelectric Power Plant, Argyll and Bute.

To develop a sustainable future you need to think about meeting today's needs and protecting the聽environment听补苍诲听resources聽for the future.

Hydroelectric power is a renewable energy because there will always be rain and other precipitation. However changing climate and rainfall may sometimes affect how much water is available to generate it.

It produces no direct carbon emissions or pollution and so can help minimise global heating.

Setting up hydro dams uses large amounts of concrete and this contributes to carbon emissions. Dead vegetation can become trapped behind . As it rots, this releases carbon monoxide and methane, both of which are greenhouse gases.

Smaller run-of river hydro schemes that do not rely on large dams reduces both of these issues.

Advantages and disadvantages of hydroelectric power

Advantages

  • 罢丑别谤别鈥檚 no pollution from waste products or , no fuel costs and it鈥檚 cheap to run once it鈥檚 set up.
  • Plus, with dams, we can regulate the creation of electricity, only producing when we need to.
  • Water power in its various forms is a renewable energy resource.
  • Hydroelectric power stations that store water are very reliable and the amount of electricity produced can be easily altered to meet demand.
  • Valves can be opened very quickly to produce energy at peak times.

Disadvantages

  • They are very expensive to build. A lot of concrete is needed to build a dam, and making that concrete creates a lot of carbon dioxide.
  • There can also be environmental problems, too. When a valley is dammed, large areas of land are flooded which can have a negative impact on wildlife, habitats and local communities.
  • You need the right type of geography 鈥 hilly with lots of water. So not a good idea in a flat desert.
  • Dams can block fishes' migration routes. They alter the flow of water downstream which may affect people and the environment down the rest of the river valley.
  • Rotting vegetation that would have just normally flowed away can get trapped by dams. This ends up rotting to produce methane and carbon monoxide 鈥 that end up in the atmosphere.

Test your knowledge

More on Energy sources and sustainability

Find out more by working through a topic